ntopng vs. Packet Sender

NetCrunch is commercial, self-hosted, agentless network and IT infrastructure monitoring software for Windows Server. It monitors network devices, servers, virtualization platforms, cloud services including AWS, Azure, and Google Cloud, applications, websites, logs, telemetry, and custom data using technologies such as SNMP, WMI, REST APIs, and scripts. NetCrunch supports 680+ monitoring targets and provides 270+ ready-to-use Monitoring Packs for devices, applications, and operating systems. Policy-based monitoring automatically applies monitoring settings, Monitoring Packs, thresholds, and alerts to matching devices and systems. Licensing is based on monitored nodes and network interfaces rather than individual sensors, checks, or metrics. Real-time dashboards and automatic Layer 2 and routing topology maps provide visibility into network status and performance. NetCrunch supports event correlation, dependency-aware alert suppression, predictive thresholds, escalation, and 40+ automated response actions, including script execution, notifications, webhooks, and integrations with external IT and collaboration tools. NetCrunch also provides hardware and software inventory, network device configuration backup and change tracking, bandwidth monitoring, and network traffic analysis using NetFlow, sFlow, IPFIX, and other flow technologies. Distributed Monitoring Probes extend monitoring to remote and isolated locations, while REST APIs support integration and automation with external systems. NetCrunch is self-hosted on Windows Server and can monitor on-premises, air-gapped, cloud, and hybrid IT environments.

Elecard Boro is an enterprise-grade software platform built for real-time video stream monitoring and end-to-end quality assurance across distributed networks. Designed specifically for IPTV operators, OTT providers, and broadcasters, Boro provides the centralized visibility needed to safeguard broadcast integrity, automate compliance reporting, and maintain flawless viewer experiences. Operational Workflow: Boro deploys lightweight software probes at critical execution points throughout your delivery chain to continuously analyze UDP, RTP, RTMP, HTTP, HLS, DASH, and SRT streams. By centralizing multi-point stream data onto a unified server, network engineers can immediately correlate measurements, pin down the exact source of signal degradation, and receive instant, actionable alerts (via Email, SNMP, Webhook, PagerDuty, or Telegram) the moment an anomaly occurs. Key Features & Benefits: • Rapid Deployment & Scalability: Launch a monitoring probe in just 10–30 minutes. Easily scale your infrastructure by adding new probes to the unified Boro ecosystem on any hardware of your choice. • Proactive Issue Resolution: Monitor over 50 QoS and QoE parameters (including full ETSI TR 101 290 compliance) and use triggers to localize network anomalies before they impact your subscriber base. • Broad Protocol Support: Analyze UDP, RTP, RTMP, HTTP, HLS, DASH, and SRT streams up to Ultra-HD resolution, complete with stream thumbnail capture. • Advanced Diagnostics: Use comprehensive analysis of SCTE-35 ad-insertion cues and PCAP stream recording for in-depth delivery troubleshooting. • Effortless Integration & Access: Access monitoring data from any device via an intuitive web interface. Seamlessly integrate Boro into your existing workflow using WebHook, SNMP, and ControlAPI.

Auvik Network Management offers a sophisticated software solution for network oversight that enables IT experts to gain comprehensive insight, automate processes, and manage their network infrastructure effectively. Organizations, regardless of their scale, rely on this cutting-edge platform to improve operational efficiency, bolster security measures, and enhance performance metrics. A key highlight of Auvik is its ability to provide real-time network mapping and discovery, which automatically creates interactive visual representations of your network’s layout. This feature simplifies the identification of devices, connections, and possible bottlenecks within the network. Such critical insights facilitate better planning and optimization of network architecture, ensuring peak efficiency and reliability. By leveraging Auvik’s capabilities, organizations can proactively address issues and adapt to changing network demands.

Cloudbrink's secure access service significantly enhances both employee productivity and morale. For IT and business executives facing challenges with remote employees due to unreliable network performance, Cloudbrink’s High-Availability as a Service (HAaaS) offers a cutting-edge zero-trust access solution that provides a remarkably fast, in-office-like experience for today’s hybrid workforce, regardless of their location. Unlike conventional ZTNA and VPN options that compromise security for performance, leading to employee frustration and decreased productivity, Cloudbrink’s solution secures user connections while effectively addressing the end-to-end performance challenges that others overlook. The Automated Moving Target Defense security provided by Cloudbrink stands out among other secure access solutions. Recognized by Gartner as the "future of security," Cloudbrink is at the forefront of innovation in this field. By dynamically altering the attack surface, it becomes considerably more difficult for adversaries to target a Cloudbrink user’s connection. This includes rotating certificates every eight hours or less, eliminating fixed Points of Presence (PoPs) by allowing users to connect to three temporary FAST edges, and continually changing the mid-mile path. If you seek the quickest and most secure solution for remote access connectivity, Cloudbrink is undoubtedly the answer you’ve been searching for. With Cloudbrink, you can ensure a seamless experience for your remote teams while maintaining the highest security standards.

TotalView provides comprehensive network monitoring and straightforward root-cause analysis of issues, using clear, accessible language. This solution tracks every device and all interfaces associated with those devices, ensuring nothing is overlooked. Furthermore, TotalView delves deep by gathering 19 different error counters, along with performance metrics, configuration details, and connectivity data, allowing for a holistic view of the network. An integrated heuristics engine processes this wealth of information to deliver clear, easily understandable insights into problems. With this system, even junior engineers can tackle complex issues, freeing up senior engineers to concentrate on higher-level strategic initiatives. The main product encompasses all essential tools required for maintaining an optimally functioning network, including configuration management, server and cloud service monitoring, IP address management (IPAM), NetFlow analysis, path mapping, and diagramming capabilities. By utilizing TotalView, you can achieve complete visibility of your network, enabling you to resolve issues more swiftly and efficiently, ultimately enhancing overall network performance.

Statseeker stands out as a robust network performance monitoring solution, designed to be both rapid and scalable while also being budget-friendly. With the capability to set up on a single server or virtual machine in mere minutes, Statseeker can map out your entire network in less than an hour, all without significantly affecting your bandwidth availability. It supports monitoring for networks of various sizes, polling up to a million interfaces every minute and gathering an array of network data types, including SNMP, ping, NetFlow (along with sFlow and J-Flow), syslog, trap messages, SDN configurations, and health metrics. What sets Statseeker apart is its approach to performance data, which are never averaged or rolled up, thereby removing uncertainty in tasks such as root cause analysis, capacity planning, and identifying over- or under-utilized infrastructure. The solution's comprehensive data retention allows its built-in analytical engine to accurately recognize performance anomalies and predict network behaviors well in advance, empowering network administrators to engage in proactive maintenance rather than merely addressing issues as they arise. Furthermore, Statseeker provides intuitive dashboards and ready-to-use reports, enabling users to identify and resolve network issues before they impact end users, ensuring a smoother and more reliable network experience overall.

Most MSPs and internal IT teams are stitching together four to six separate tools just to keep operations running - a PSA here, an RMM there, plus separate helpdesk, MDM, asset tracking, network monitoring, and documentation tools. SuperOps takes a different approach: everything lives on one platform, built on a single shared data layer from the ground up. That shared architecture isn't just a convenience - it's what makes SuperOps' AI actually useful. Monica AI wasn't bolted on afterward; it was built alongside the platform, which means it has full context across tickets, assets, and workflows. In practice, that looks like automatic ticket triage, proactive patch and CVE risk alerts, auto-generated worklogs, smart KB article suggestions, and a growing set of workflows that run autonomously without a technician touching them. On the compatibility side, SuperOps covers the full device landscape — Windows, macOS, Linux, iOS, iPadOS, and Android — and plugs into the tools IT teams already run, including Slack, Teams, Azure AD, Okta, QuickBooks, Xero, Bitdefender, and SentinelOne. Remote access is included out of the box too, with both Splashtop and ISL Online bundled at no extra cost. Add in transparent, predictable pricing, quick time-to-deploy, and a product team that's still founder-led and shipping fast - and it's a platform built for teams that want to stop managing tools and start managing outcomes.

Control D is a versatile DNS filtering and traffic redirection service that utilizes advanced Secure DNS protocols such as DNS-over-HTTPS, DNS-over-TLS, and DNS-over-QUIC, while also accommodating traditional DNS. With Control D, users can effectively eliminate harmful threats, restrict various types of undesirable content across the network—including advertisements, trackers, IoT data, adult material, social media, and more—while also redirecting traffic through transparent proxies and monitoring network activities and usage patterns at a client-specific level. Consider it your own personalized Authoritative DNS resolver for the entire Internet, providing you with detailed control over which domains are allowed to be resolved, redirected, or blocked. This capability not only enhances security but also empowers users to tailor their online experience according to their preferences.

JDisc Discovery serves as a robust solution for IT asset management and network discovery, offering organizations valuable, real-time visibility into their complete IT landscape. By conducting automated network scans, it efficiently detects and organizes a variety of devices, which ranges from physical servers and workstations to virtual machines and network appliances, thus providing users with a comprehensive asset inventory. The tool meticulously gathers crucial information, encompassing hardware specifications, installed software, system configurations, and the interrelationships among devices, ensuring thorough documentation of the IT environment. One of the standout features of JDisc Discovery is its agentless design. Instead of requiring software installation on each device, it utilizes multiple protocols such as SNMP, SSH, and WMI to collect data, facilitating rapid deployment and ensuring compatibility across an array of operating systems, including Windows, Linux, and Unix. This adaptability makes it particularly well-suited for varied and evolving IT infrastructures, allowing for effective and unobtrusive data acquisition. Additionally, its user-friendly interface enhances the overall management experience, empowering IT teams to make informed decisions based on accurate and up-to-date information.

Approximately 25 million engineers are employed across a wide variety of specific roles. As companies increasingly transform into software-centric organizations, engineers are leveraging New Relic to obtain real-time insights and analyze performance trends of their applications. This capability enables them to enhance their resilience and deliver outstanding customer experiences. New Relic stands out as the sole platform that provides a comprehensive all-in-one solution for these needs. It supplies users with a secure cloud environment for monitoring all metrics and events, robust full-stack analytics tools, and clear pricing based on actual usage. Furthermore, New Relic has cultivated the largest open-source ecosystem in the industry, simplifying the adoption of observability practices for engineers and empowering them to innovate more effectively. This combination of features positions New Relic as an invaluable resource for engineers navigating the evolving landscape of software development.