OdinAI vs. Guava Provider Dashboard

Meet Healthee—your intelligent healthcare navigation platform. Healthee takes the guesswork out of healthcare by transforming complex benefits into clear, personalized answers—instantly. Employees can seamlessly navigate their existing health plans with on-demand guidance for every healthcare and benefits question, whenever they need it. At the center of the experience is Zoe, Healthee’s AI-powered Personal Health Assistant. Zoe delivers tailored, easy-to-understand insights about coverage, costs, and care options—helping employees make smarter healthcare decisions that reduce unnecessary spend and improve outcomes. No more confusing benefits documents. No more long wait times to speak with a healthcare representative. With Healthee, everything employees need to understand and use their benefits is available in one intuitive, mobile-first experience. Smarter Decisions During Open Enrollment Healthee simplifies open enrollment with side-by-side plan comparison tools that help employees choose the right plan based on their needs, usage, and expected costs. By guiding employees to better-fit plans, Healthee reduces over-insurance, minimizes surprise expenses, and drives meaningful cost savings for both employees and employers. Built for HR - and the CFO Healthee’s AI-driven benefits administration technology delivers fast, accurate responses to employee questions, significantly reducing HR workload while boosting benefits utilization and employee satisfaction. For finance leaders, Healthee goes beyond engagement. Claims analytics and insights provide visibility into healthcare spend, utilization trends, and cost drivers - empowering CFOs and benefits leaders to identify savings opportunities, optimize plan design, and make data-backed decisions to control rising healthcare costs. The result: -Lower healthcare spend. -More confident employees. -A smarter, more cost-effective benefits strategy—powered by Zoe AI for benefits managers.

StackAI is an enterprise AI automation platform built to help organizations create end-to-end internal tools and processes with AI agents. Unlike point solutions or one-off chatbots, StackAI provides a single platform where enterprises can design, deploy, and govern AI workflows in a secure, compliant, and fully controlled environment. Using its visual workflow builder, teams can map entire processes — from data intake and enrichment to decision-making, reporting, and audit trails. Enterprise knowledge bases such as SharePoint, Confluence, Notion, Google Drive, and internal databases can be connected directly, with features for version control, citations, and permissioning to keep information reliable and protected. AI agents can be deployed in multiple ways: as a chat assistant embedded in daily workflows, an advanced form for structured document-heavy tasks, or an API endpoint connected into existing tools. StackAI integrates natively with Slack, Teams, Salesforce, HubSpot, ServiceNow, Airtable, and more. Security and compliance are embedded at every layer. The platform supports SSO (Okta, Azure AD, Google), role-based access control, audit logs, data residency, and PII masking. Enterprises can monitor usage, apply cost controls, and test workflows with guardrails and evaluations before production. StackAI also offers flexible model routing, enabling teams to choose between OpenAI, Anthropic, Google, or local LLMs, with advanced settings to fine-tune parameters and ensure consistent, accurate outputs. A growing template library speeds deployment with pre-built solutions for Contract Analysis, Support Desk Automation, RFP Response, Investment Memo Generation, and InfoSec Questionnaires. By replacing fragmented processes with secure, AI-driven workflows, StackAI helps enterprises cut manual work, accelerate decision-making, and empower non-technical teams to build automation that scales across the organization.

SurveyJS comprises a collection of four open-source JavaScript libraries that provide the advantages of a customized, in-house survey application while significantly minimizing the time and resources required for deployment. These libraries function independently of specific server code or database needs, allowing for seamless integration with well-known JavaScript frameworks such as React, Angular, Vue.js, jQuery, Knockout, and others. They are built to interact with any server capable of processing JSON requests, thereby ensuring compatibility with a wide range of server setups and databases. This product suite includes: - An open-source library licensed under MIT that facilitates the rendering of dynamic JSON-based forms within your web application and captures user responses. - A self-hosted form builder featuring drag-and-drop functionality, an integrated CSS theme editor, and a graphical user interface for setting conditional rules; it also generates JSON definitions of your forms in real time. - A PDF Generator library that allows for the conversion of SurveyJS surveys and forms into PDF files directly in the browser. - The Dashboard library, which enhances survey data analysis through interactive and customizable charts and tables. We invite you to explore our website and experience our comprehensive demo at no cost. This opportunity will allow you to assess the full capabilities of SurveyJS firsthand.

Qloo is an AI-powered cultural intelligence and personalization platform that helps organizations analyze consumer tastes, identify cultural relationships, and deliver more relevant recommendations and experiences. The software combines a proprietary cultural knowledge graph with machine learning models trained to recognize relationships between entertainment, dining, travel, retail, fashion, brands, and other lifestyle interests. Its underlying database contains more than 600 million structured cultural entities and over 30 trillion cross-domain relationships and signals. Qloo's Taste AI technology analyzes anonymized behavioral information and cultural associations to predict affinities between products, places, brands, and interests across otherwise unrelated categories. Audience intelligence tools help marketers understand customer preferences, compare audience segments, identify emerging cultural trends, and evaluate potential partnerships or market opportunities. Its personalized recommendation capabilities use existing preferences and contextual signals to suggest relevant movies, music, restaurants, destinations, products, and experiences. Cultural data enrichment allows organizations to supplement their existing records with structured entity attributes, cultural characteristics, popularity indicators, and relationships to other entities. Locality intelligence provides geographic analysis of cultural interests at the neighborhood, city, regional, and national levels to support localized merchandising, recommendations, and business planning. Qloo also provides an AI grounding layer that enables large language models and autonomous agents to retrieve factual cultural information and generate recommendations based on contextual taste signals. Developers and enterprise teams can access its capabilities through APIs, managed data feeds, and integrations with data warehouses, customer data platforms, business intelligence applications, and other systems.

Elecard Boro is an enterprise-grade software platform built for real-time video stream monitoring and end-to-end quality assurance across distributed networks. Designed specifically for IPTV operators, OTT providers, and broadcasters, Boro provides the centralized visibility needed to safeguard broadcast integrity, automate compliance reporting, and maintain flawless viewer experiences. Operational Workflow: Boro deploys lightweight software probes at critical execution points throughout your delivery chain to continuously analyze UDP, RTP, RTMP, HTTP, HLS, DASH, and SRT streams. By centralizing multi-point stream data onto a unified server, network engineers can immediately correlate measurements, pin down the exact source of signal degradation, and receive instant, actionable alerts (via Email, SNMP, Webhook, PagerDuty, or Telegram) the moment an anomaly occurs. Key Features & Benefits: • Rapid Deployment & Scalability: Launch a monitoring probe in just 10–30 minutes. Easily scale your infrastructure by adding new probes to the unified Boro ecosystem on any hardware of your choice. • Proactive Issue Resolution: Monitor over 50 QoS and QoE parameters (including full ETSI TR 101 290 compliance) and use triggers to localize network anomalies before they impact your subscriber base. • Broad Protocol Support: Analyze UDP, RTP, RTMP, HTTP, HLS, DASH, and SRT streams up to Ultra-HD resolution, complete with stream thumbnail capture. • Advanced Diagnostics: Use comprehensive analysis of SCTE-35 ad-insertion cues and PCAP stream recording for in-depth delivery troubleshooting. • Effortless Integration & Access: Access monitoring data from any device via an intuitive web interface. Seamlessly integrate Boro into your existing workflow using WebHook, SNMP, and ControlAPI.

RouteGenie is NEMT software running medical transportation operations at scale: 600+ fleets, 20,000+ vehicles, 46 states and two countries, approximately 50,000 trips every day. Where operators feel it: schedules rebuild automatically with native multiload, not by hand; broker trips flow in and statuses flow back across 28 live integrations including ModivCare, MTM, Veyo, Verida, SafeRide Health, Alivi, MAS and Uber Health; Medicaid billing, CMS 1500, claim scrubbing and denial management live in the same system as dispatch. Multi-site operators run every location in one instance with role-based access and a complete audit trail on every trip change. Enterprise administration comes standard: SAML2 SSO, single-tenant deployment with per-customer data isolation, SOC 2 Type 1 attestation, HIPAA-aligned controls and BAAs, open REST API. Pricing is flat per vehicle with unlimited trips and unlimited users — cost tracks fleet size, not trip volume or headcount, so total cost does not climb as volume grows. Enterprise agreements include dedicated implementation, named support and RFP support. No fleet minimum.

Denodo is an enterprise data management platform designed to deliver live, unified, governed, and business-ready data for AI agents, analytics, applications, and self-service users. It uses logical data management to connect information across hybrid, multi-cloud, on-premises, SaaS, lakehouse, and third-party environments without moving or duplicating data. The platform helps organizations break down data silos by creating a single trusted access layer over distributed systems. Denodo supports trustworthy AI by giving agents real-time situational awareness, relevant enterprise context, consistent semantics, and compliance guardrails. Its zero-copy approach helps organizations reduce data replication, simplify integration, and avoid delays caused by traditional pipeline-heavy architectures. The platform also provides a personalized data marketplace where users can search, discover, prepare, and use governed data with less IT involvement. Denodo’s governance capabilities enforce consistent policies across cloud and on-premises environments while supporting fine-grained oversight, lineage, and compliance controls. Its real-time query optimization allows teams to make decisions using current data while keeping infrastructure costs under control. Business-contextual semantics help tailor data delivery for different roles, use cases, applications, and AI models. Denodo can support use cases such as AI agents and apps, lakehouse optimization, real-time operations, data products, and enterprise self-service analytics. With faster insight delivery, stronger governance, and trusted data access, Denodo helps organizations create a reliable foundation for agentic AI and modern data-driven operations.

Globalscape's Enhanced File Transfer platform (EFT) is designed to be an intuitive managed file transfer solution (MFT). It is relied upon by numerous Windows-focused organizations for essential file transfers. EFT combines robust security measures and compliance features along with advanced tools for collaboration, automation, and data analysis. It is offered in both cloud/SaaS via EFT Arcus and on-premises deployment options. Unlike conventional file transfer software, EFT delivers enterprise-grade data security and automates data transfers by seamlessly integrating with back-end systems. The administration of EFT is straightforward, granting extensive control over the file transfer process. By replacing outdated legacy systems and costly leased lines, EFT serves as a high-performing and scalable solution for modern data transfer needs. Furthermore, its flexibility allows organizations to adapt to changing file transfer requirements efficiently.

LM-Kit.NET serves as a comprehensive toolkit tailored for the seamless incorporation of generative AI into .NET applications, fully compatible with Windows, Linux, and macOS systems. This versatile platform empowers your C# and VB.NET projects, facilitating the development and management of dynamic AI agents with ease. Utilize efficient Small Language Models for on-device inference, which effectively lowers computational demands, minimizes latency, and enhances security by processing information locally. Discover the advantages of Retrieval-Augmented Generation (RAG) that improve both accuracy and relevance, while sophisticated AI agents streamline complex tasks and expedite the development process. With native SDKs that guarantee smooth integration and optimal performance across various platforms, LM-Kit.NET also offers extensive support for custom AI agent creation and multi-agent orchestration. This toolkit simplifies the stages of prototyping, deployment, and scaling, enabling you to create intelligent, rapid, and secure solutions that are relied upon by industry professionals globally, fostering innovation and efficiency in every project.

Bridgit is the leading AI workforce planning software built exclusively for construction. Founded with a simple mission — to help the construction industry maximize profits by taking a people-first approach — Bridgit has become the definitive workforce planning platform for top ENR-ranked contractors across North America. Construction's biggest challenge isn't winning work. It's having the right people ready to deliver it. Between pursuits, awarded projects, and active work across multiple offices, the moving parts within workforce planning are endless. Spreadsheets create blind spots, disconnected tools slow decisions, and last-minute scrambles put both margins and people at risk. Bridgit solves this by giving operations leaders one clear, real-time view of their entire workforce — so they can plan proactively instead of react constantly. Bridgit is a complete workforce planning solution built hand-in-hand with general contractors. It centralizes project pipelines, people data, skills, certifications, utilization, and forecasting in a single platform — replacing the whiteboards, spreadsheets, and gut-feel decisions that have defined the industry for decades. Bridgit AI layers on intelligent staffing recommendations and experience-based matching, helping teams put the right person on the right project, every time. Trusted by over 40% of the ENR 400 — including Balfour Beatty, Skanska, Ryan Companies, and Rogers-O'Brien — Bridgit integrates seamlessly with Procore, Autodesk Construction Cloud, Salesforce, BambooHR, Unanet, and more. Recently expanded to serve specialty contractors with purpose-built Labor Forecasting and Crew Management capabilities, Bridgit now supports the full construction workforce from the GC's office to the trades in the field.